QUANTIC GENERATOR MODULE QGM200

NEW GENERATION THERMAL BLAST CHILLERS

This new generation of blast chillers allows you to convert directly into electricity with a yield higher than 95% up to 10% of the heat energy exchanged.

no maintenance

no gas leakage

no mechanical parts in motion

passive system

very low noise system - 10db

DATASHEET

Code: QGM200
Electrical power @300 degrees kelvin: W 200
Open circuit voltage: VDC 96
Maximum power transfer voltage: VDC 48
Maximum power transfer current: A 4.17
Maximum hot fluid inlet temperature: 300 º C
Standard flow rate: 16 l/m
Resistance: Mpa 0.25
Step of the Fittings: G1/2″
Dimensions: mm 120 x 120 x 620
Weight: Kg 16.5

Operating principle PATENTED PCT / IB2020 / 051677 Patent

The system works by circulating the liquid to be broken down in a system of radiant plates that convert the heat of the fluid into radiant power which is then captured by special quantum cells that convert the light radiation emitted in the infrared range into electric current. This conversion of infrared into electrical energy is essential to remove thermal energy from the system and break down the fluid in question.

The generator is composed of 16 quantum cells of 56 × 56 mm size and can generate up to 200W of electrical power with hot fluid to be blast down at 300 degrees and a cold source at 30 degrees.

The diagram illustrates the electrical production (therefore the thermal abatement power) as the difference between the inlet and outlet temperatures varies.

As can be seen, thermal reductions of up to 5% can be achieved with electricity production equal to 95% of this value.

CURVE IN ENERGY KWH PRODUCTS TESTED ON CASE STUDIES OF REAL AND CERTIFIED SYSTEMS

DATA TABLE CONSIDERING A 200 W MODULE